Maintenance & Repairs
There are different types of fire extinguishers such as water based, powder based, CO2, Foam, Wet Chemical, etc. Extinguishers should be used depending on the type of fire. |
Polymer Coating or Polymeric coating refers to coatings or paints that are made with polymers that provide protection from corrosion. Teflon Coating is a type of Polymer Coating that is made from polytetrafluoroethylene (PTFE), which is sold under the brand name "Teflon." |
Wall putty serves purposes like leveling of wall surfaces, and being a protective base for expensive paints and many more. On the other hand, POP short for Plaster of Paris, is a white powder that is used for the outside layer of building and walls. |
Vitrified tiles are made from the clay but with the additional elements like silica, quart and feldspar mixed in the mixture, whereas ceramic tiles are made simply from clay or can be referred to earthen clay. Thus, they primarily differ in their composition. |
Vitrified tiles refer to any of the tiles that are made by the process of vitrification. In this process, high temperatures are used for baking the tiles. Glazed tiles refer to the tiles having a shiny glazed surface. A coating of glaze is applied to the tiles and then they are set to fire at very high temperature.
|
Vitrified tiles refer to any tiles that are made by the process of vitrification. In this process, high temperatures are used for baking the tiles. Porcelain tiles are also vitrified tiles and generally fall in the category of full vitrified tiles. It means that a porcelain tiles has the water absorption of less than 0.5 percent. |
Vitrified tiles refer to any tiles that are made by the process of vitrification. In this process, high temperatures are used for baking the tiles. On the other hand, Marbonite is a brand name of the company HR Johnson. Marbonite tiles are vitrified tiles under the brand 'Marbonite' and thus, possess the same qualities and characteristics as other vitrified tiles. |
Vitrified tiles refer to the tiles that are made by the artificial process of vitrification. In this process, high temperatures are used for baking the tiles. These tiles are known for their strength and less porousness. Marble tiles are made from the natural stone known as ‘Marble’ and thus, tiles are just cut from the marble. These tiles are porous, and thus absorb water easily. |
Vitrified and semi vitrified tiles posses the property of less water retention and these tiles are considered to be very strong and stain resistant. The vitrified tiles are also referred as fully vitrified if these tiles soak 0.5 percent of water and are completely frost resistant. On the other hand, semi vitrified tiles have absorption power of 3 to 6 percent. |
Vitrified tiles posses the property of less water retention and these tiles are known for their strength and stain-resistance. On the other hand, rectified tiles or sharp edge tiles have plain and square edges and are first baked and then cut in desirable shapes. |
Tile is a piece of baked clay used in covering roofs, walls or floors. It is also a similar piece of plastic material used for covering floors. Marble is a kind of hard, usually highly polished stone, used for sculpture and as a building material. |
Marble is a kind of hard, usually highly polished stone. On the other hand, granite is also a type of hard but usually grey or red rock. Both are used for sculptures and building. |
Birla White Cement and Birla Putty are both products from an Indian company known as Birla White. Birla White Cement is whitest white cement that is considered to be of high quality and is best suited to specialty applications where appearance is a high priority, whereas Birla Putty is used to facilitate care for walls. |
Hardwood is the wood that comes from an angiosperm tree. This is a type of tree that has seeds that are enclosed, be it in pods, a shell, a covering or in a fruit. Hardwood tends to be long-lasting and durable. Due to this hardwoods are generally accepted as being the highest quality wood. Engineered wood, on the other hand, is made up of hardwood and plywood. It is composed of two or more layers of wood in the form of planks. It consists of alternating layers of hardwood and plywood in 90° angles to each other. The top layer is mostly composed of hardwood, as this is the layer that will be visible, once the flooring is set. |
Cane is a grass in the Poaceae family of grass. It mainly belongs to two genera in the Poaceae family: Arundo and Arundinaria. Arundo is indigenous to the region between the Mediterranean and the Far East, while Arundinaria is native to the Americas. Wicker, on the other hand, refers to the process through which cane furniture is made. It may also be commonly used to refer to pieces made from a woven fiber. Wicker used the fiber of various plants to make certain pieces. This fiber can be sourced from various plants, such as bamboo, cane, rattan stalks and/or palms. At times, the fiber may even be plastic or resin. It may even be a combination of plastic, resin and/or natural fibers. |
Pages
|
|
|
|